SOFTER — STRONGER — SMARTER
Find the right suspension parts.
Toyota MR2 Strut rod bushings are the platform-specific polyurethane bushing kits used to replace worn rubber bushings at the chassis and lower control arm mounting positions of the front or rear strut rod. The strut rod, also called a tension rod or drag link on applicable platforms, connects the front lower control arm to the chassis and resis... Read more
Toyota MR2 Strut rod bushings are the platform-specific polyurethane bushing kits used to replace worn rubber bushings at the chassis and lower control arm mounting positions of the front or rear strut rod. The strut rod, also called a tension rod or drag link on applicable platforms, connects the front lower control arm to the chassis and resists the rearward movement of the arm under braking loads, maintaining correct front wheel caster geometry and controlling longitudinal arm compliance. On rear suspension platforms that use a rear strut rod for longitudinal axle or arm location, the strut rod bushing at the chassis mount position performs the same function at the rear, controlling rear arm or axle longitudinal compliance under braking and acceleration.
As strut rod bushings wear at either the chassis or control arm end, increasing longitudinal compliance allows the arm to move rearward under braking, introducing caster drift, brake dive, steering wander and the front end instability that progressive strut rod bushing wear produces. The range covers rear strut rod bushing sets and kits for applicable passenger and performance platforms, front tension rod to chassis mount bushing sets for RWD and 4WD variants, strut and control arm to chassis mount bushing sets for applicable 4WD platforms, front strut rod bushing kits, and strut rod to lower control arm bushing kits for the arm-end mount position. All products are backed by a limited lifetime warranty. Installation guides are available across most products.
Strut rod bushing wear is one of the most geostandardally significant forms of suspension wear on the platforms that use this design, because the strut rod is the only longitudinal locating device for the front lower arm on these suspension systems. As the chassis-end or arm-end bushing deteriorates, the arm is permitted to move rearward under each braking event, shifting the wheel's caster angle and contributing to the brake dive, steering pull and front end wander that mark the progression of strut rod bushing wear from a subtle looseness to an obvious and uncomfortable handling characteristic.
On rear platforms using a strut rod for longitudinal axle or arm location, worn strut rod bushings allow the axle or arm to shift under acceleration and braking, degrading rear axle tracking consistency and contributing to rear end instability under dynamic load. Renewing Toyota MR2 strut rod bushings with correctly specified polyurethane alternatives at both the chassis and arm-end positions simultaneously restores correct longitudinal compliance and caster stability, eliminating arm movement under braking and returning precise, stable and predictable suspension behavior from the moment of installation.
The Toyota MR2 strut rod bushing range includes:
Strut rod bushing renewal is the most direct repair for the brake dive, steering wander and front end instability that worn longitudinal arm compliance introduces on platforms that use a strut rod to locate the front lower arm. Renewing the bushings at both the chassis and arm-end positions together restores correct arm compliance across the full longitudinal load path, eliminating the movement that worn bushings allow and returning the front end to the precise, stable and caster-consistent behavior that correct strut rod compliance delivers.
For workshops completing front suspension servicing and alignment corrections on applicable platforms, Toyota MR2 strut rod bushing renewal is a foundational step that addresses the structural-level cause of front end geometry drift before alignment or other suspension work is carried out, ensuring the geometry correction made at the alignment rack is set from a correctly compliant and correctly located baseline.
Toyota MR2 Strut rod bushing kits are designed for installation at the front and rear strut rod chassis and control arm mount positions on applicable platforms. Installation times range from under an hour for simple single position kits to four hours for full strut and control arm chassis mount bushing set installations. Installation guides are available across most products. For additional technical assistance, a dedicated support team is available to confirm correct product selection, drivetrain configuration and fitment for the specific platform and strut rod mount design.
Toyota MR2 Strut rod bushings are manufactured from high-strength polyurethane engineered to withstand the sustained longitudinal braking and acceleration loads, road shock and environmental exposure that strut rod chassis and arm mount positions are subject to in everyday and demanding use. Polyurethane maintains correct arm compliance and caster stability for longer than factory rubber alternatives under the repeated braking and acceleration load cycling that strut rod bushing positions experience, delivering more consistent front end geometry and handling precision throughout the service life of the installation. All products are backed by a limited lifetime warranty.
Toyota MR2 Strut rod bushings are a practical solution for:
The right strut rod bushing kit restores correct longitudinal arm compliance and caster stability at every renewed mount position, eliminates arm movement under braking and acceleration, and delivers more precise, stable and controlled front and rear suspension behavior through every braking and cornering input.
Explore the full Toyota MR2 strut rod bushing range and find the right kit for your vehicle. With rear strut rod bushing sets and kits for applicable RWD performance platforms, front tension rod to chassis mount bushing sets for RWD and 4WD configurations, strut and control arm to chassis mount bushing sets for applicable 4WD platforms, front strut rod bushing kits and strut rod to lower control arm bushing kits, you can restore correct longitudinal arm compliance and complete every strut rod bushing service with confidence.
Qty Required 1 |
|---|
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
Front Upper And Lower Control Arm Bushing Set - 4WD
1 month ago from Los Angeles, US
US
Australia
United Kingdom
Europe