SOFTER — STRONGER — SMARTER
Find the right suspension parts.
Ford Bronco C-bushings are the offset polyurethane bushing sets used to correct the rear differential pinion angle on solid rear axle platforms following a suspension lift. On these platforms, the differential housing interfaces with the axle housing through a C-shaped bore, and the C-bushing installed within this interface controls the rotation... Read more
Ford Bronco C-bushings are the offset polyurethane bushing sets used to correct the rear differential pinion angle on solid rear axle platforms following a suspension lift. On these platforms, the differential housing interfaces with the axle housing through a C-shaped bore, and the C-bushing installed within this interface controls the rotational position of the differential and pinion shaft relative to the axle. When a suspension lift raises the chassis relative to the axle, the geometry between the driveshaft and the differential pinion changes, introducing a driveshaft angle error that generates vibration, accelerates U-joint wear and creates the characteristic driveline vibration under power that appears after a lift is installed.
A C-bushing set corrects this by rotating the differential within the C-bore to tilt the pinion upward toward the driveshaft, restoring the driveshaft and pinion to the correct operating angles for the lifted ride height. Multiple offset angles address a range of lift heights, with the correct angle selected based on the degree of pinion angle correction required for the specific lift. Sets of four cover the single axle requirement, while sets of fourteen provide shop stock for multiple installations. All products include installation guides and are backed by a limited lifetime warranty.
A suspension lift that changes the chassis-to-axle relationship on a solid rear axle platform changes the driveshaft operating angle at both the transmission output and the differential pinion simultaneously. If the pinion angle is not corrected to account for the new geometry, the driveshaft operates through an angle that is outside the designed operating range of the U-joints, generating vibration under power that increases with vehicle speed and load and accelerating U-joint and driveshaft wear well beyond its expected service life.
Ford Bronco C-bushing correction is the most direct and cost-effective method of addressing pinion angle error on platforms with C-bore differential housings because it corrects the angle at the differential itself without requiring driveshaft modification, transfer case drop kits or other drivetrain alterations. Selecting the correct offset angle for the specific lift height ensures the pinion is tilted to the correct position for smooth, vibration-free driveshaft operation at the new ride height.
The Ford Bronco C-bushing range includes:
All sets include an installation guide. All products are backed by a limited lifetime warranty.
Driveline vibration after a suspension lift on a solid rear axle platform is one of the most predictable and correctable post-lift symptoms, yet it is also one of the most commonly overlooked during the initial installation. Addressing pinion angle correction at the time of the lift rather than after the vibration has appeared ensures the driveshaft operates within the correct angle range from the first drive, protecting U-joints and the driveshaft from the accelerated wear that incorrect pinion angle produces.
For shops completing suspension lifts on applicable solid rear axle platforms, stocking Ford Bronco C-bushings in the correct offset angles for the lift heights most commonly installed eliminates the need to source pinion correction hardware as a separate follow-up order and ensures every lift installation is completed with the driveline correctly set up from the start. Bulk packs provide a cost-effective shop stock option that covers multiple jobs across the available offset angles.
Ford Bronco C-bushings install within the C-bore of the rear axle differential housing as part of a pinion angle correction service, typically carried out alongside or immediately following a suspension lift installation. The correct offset angle is selected based on the degree of pinion angle correction required for the specific lift height. Installation guides are included with all products. For additional technical assistance, a dedicated support team is available to help confirm the correct offset angle for the specific platform and lift height combination.
Ford Bronco C-bushings are manufactured from high-strength polyurethane engineered to withstand the sustained rotational loads, vibration and environmental exposure that the differential C-bore interface is subject to in everyday and off-road use. Polyurethane maintains the set offset position within the C-bore under sustained driving loads, delivering stable and consistent pinion angle correction throughout the service life of the installation. All products are backed by a limited lifetime warranty.
Ford Bronco C-bushings are a practical solution for:
The right C-bushing set corrects the rear differential pinion angle to the correct position for the lifted ride height, eliminates post-lift driveline vibration, protects U-joints and the driveshaft from accelerated wear and ensures the drivetrain operates smoothly and correctly from the first mile after the lift is complete.
Explore the full Ford Bronco C-bushings range and find the right offset angle for your lift. With multiple offset C-bushing sets in single axle packs and bulk packs for shop stock across applicable solid rear axle 4WD and truck platforms, you can correct rear differential pinion angle accurately and complete every suspension lift installation with a correctly set up driveline and confidence.
4 Items
Qty Required 1 |
|---|
Qty Required 1 |
|---|
Qty Required 1 |
|---|
Qty Required 1 |
|---|
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
The website will be temporarily unavailable for scheduled maintenance.
Nolathane Nissan Rogue 14-19; Rear Upper Control Arm Bushing Kit
1 month ago from Garden Grove, US
US
Australia
United Kingdom
Europe