SOFTER — STRONGER — SMARTER
Find the right suspension parts.
JK WRANGLER Panhard rod bushes are the polyurethane bush kits used to replace worn rubber bushes at the chassis and differential mounting positions of the panhard rod. The panhard rod is the lateral location rod that controls side-to-side axle movement on solid axle suspension systems, connecting the axle to the chassis on one end and the differ... Read more
JK WRANGLER Panhard rod bushes are the polyurethane bush kits used to replace worn rubber bushes at the chassis and differential mounting positions of the panhard rod. The panhard rod is the lateral location rod that controls side-to-side axle movement on solid axle suspension systems, connecting the axle to the chassis on one end and the differential housing on the other. The bushes at each end of the rod are the sole means by which lateral axle location is maintained, directly affecting rear end stability, cornering precision, straight-line tracking and the JK WRANGLER's response to inputs under load and off-road.
As panhard rod bushes wear, they allow increasing lateral play in the axle, introducing rear end wander, vague steering response and increased NVH that worsens progressively with use. Quality polyurethane replacements restore precise lateral axle location, reduce unwanted movement and deliver more stable, responsive and refined handling across everyday and demanding conditions. A targeted and effective repair for workshops and experienced DIY users across a wide range of 4WD, classic passenger, performance and applications. Most products are backed by a lifetime warranty.
On solid axle vehicles, the panhard rod is the only component resisting lateral axle movement under cornering and road load. This makes the bush condition at each end of the rod disproportionately influential on rear end handling behaviour. Worn panhard rod bushes that allow even a few millimetres of lateral play translate directly into rear end instability, tyre scrub and a floating or wandering sensation that is often misattributed to tyre pressure or wheel alignment before the bushes are identified as the cause.
Replacing worn panhard rod bushes with correctly specified polyurethane alternatives restores precise lateral axle location, eliminating rear end wander and significantly improving cornering stability, straight-line tracking and overall handling confidence. For lifted JK WRANGLER where extended or adjustable panhard rods are fitted to correct axle centring, quality polyurethane bushes ensure the rod bush interface maintains the correct compliance to support the geometry correction the rod is designed to provide.
The JK WRANGLER panhard rod bushes range includes:
Worn panhard rod bushes are a common and frequently overlooked cause of rear end instability, tyre wear and handling imprecision on solid axle vehicles. Renewing them with quality polyurethane alternatives restores precise lateral axle location, eliminates rear end wander and delivers immediate and measurable improvements in handling confidence, cornering stability and straight-line tracking from the moment of installation.
For workshops servicing 4WDs, classic passenger vehicles and performance with solid axle rear suspension, JK WRANGLER panhard rod bush renewal is a straightforward and high-impact service that addresses a primary cause of rear end handling degradation at low cost and with a short installation time.
JK WRANGLER Panhard rod bush kits are designed for accurate installation at the chassis and differential-end mounting positions of the front or rear panhard rod. Installation time is approximately one to two hours depending on the application. Installation guides are available across most products. For additional technical assistance, a dedicated support team is available to help ensure correct product selection and fitment for the specific platform and rod configuration.
JK WRANGLER Panhard rod bushes are manufactured from high-strength polyurethane engineered to withstand the lateral load, vibration and environmental exposure that panhard rod mounting positions are subject to in everyday and demanding use. Resistant to oil, heat and road contaminants, polyurethane panhard rod bushes maintain their compliance characteristics for longer than factory rubber alternatives, delivering more consistent lateral axle location and handling performance throughout their service life. Most products are backed by a lifetime warranty.
JK WRANGLER Panhard rod bushes are a practical solution for:
The right panhard rod bush kit restores precise lateral axle location, eliminates unwanted rear end movement and delivers more stable, confident and precise handling every time.
Explore the full JK WRANGLER panhard rod bushes range and find the right kit for your vehicle. With front and rear panhard rod bush kits, differential-end bush kits, heavy duty variants, combined radius arm and panhard rod kits, and chassis bearing kits across a range of 4WD, classic, performance and commercial vehicle platforms, you can restore correct lateral axle location and complete every panhard rod service with confidence.
Front Suspension
Front Suspension
Rear Suspension
Rear Suspension
Qty Required 1 |
|---|
Kit Contents 2 Shell Bushings, 2 Tubes |
Qty Required 1 |
|---|
Kit Contents 2 Shell Bushings, 2 Tubes |
Qty Required 2 |
|---|
Kit Contents 1 Shell Bushing, 1 Tube |
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
UK
Australia
Europe
United States