SOFTER — STRONGER — SMARTER
Find the right suspension parts.
Plymouth GTX Torsion bar bushings are the polyurethane bushing kits used to replace worn or deteriorated rubber bushings at the rear anchor mount position of the front torsion bar, along with dust boot kits that protect the torsion bar adjuster and anchor hardware from contamination. On trucks and SUVs equipped with torsion bar front suspension,... Read more
Plymouth GTX Torsion bar bushings are the polyurethane bushing kits used to replace worn or deteriorated rubber bushings at the rear anchor mount position of the front torsion bar, along with dust boot kits that protect the torsion bar adjuster and anchor hardware from contamination. On trucks and SUVs equipped with torsion bar front suspension, the torsion bar replaces the conventional coil spring by running longitudinally from the lower control arm at the front to an anchor bracket at the rear of the frame or crossmember. The bushing at the rear anchor position cushions and isolates the torsion bar anchor from direct metal contact with the bracket, and the dust boot at the adjuster protects the adjustment bolt and anchor mechanism from road contamination and moisture that accelerates corrosion and eventually seizes the adjuster.
As the rear anchor bushing deteriorates, increasing harshness and noise is transmitted through the anchor position, and the torsion bar can begin to creak or knock at the mount. When the dust boot tears or collapses, the adjuster bolt is exposed to road spray, salt and contamination that corrodes the adjustment threads and bracket interface. The torsion bar bushing range covers rear anchor bushing kits and dust boot sets for applicable truck and SUV platforms. Both products are backed by a limited lifetime warranty.
Torsion bar rear anchor bushings and adjuster dust boots are among the most overlooked service items on applicable truck and SUV platforms. Because the rear anchor is tucked under the vehicle near the frame crossmember, the bushing can deteriorate significantly and the dust boot can tear without producing obvious symptoms until the condition is well advanced. A collapsed or absent dust boot allows the adjuster bolt to corrode into the bracket, making future ride height adjustment and torsion bar removal significantly more difficult and in severe cases preventing adjuster operation entirely without heat and extraction tools.
Renewing the Plymouth GTX rear anchor bushing with a correctly specified polyurethane replacement restores correct cushioning and isolation at the anchor position, eliminating creak and noise from the rear torsion bar mount. Installing a new dust boot alongside the bushing ensures the adjuster and anchor mechanism remain protected from contamination throughout the service life of the renewed installation.
The Plymouth GTX torsion bar bushing range includes:
Renewing the rear anchor bushing and installing a new dust boot together as part of a single torsion bar service ensures the anchor position is correctly cushioned and isolated and the adjuster mechanism is protected from the moment the service is completed. Allowing a torn or absent dust boot to remain in service while renewing only the bushing leaves the adjuster exposed to the same contamination that will eventually seize it, making future service more difficult.
For shops and experienced DIY users completing torsion bar height adjustments, Plymouth GTX suspension overhauls or lower control arm service on applicable platforms, including both products as part of the service ensures every component at the rear anchor position is correctly renewed and protected going forward.
Plymouth GTX Torsion bar bushing kits and dust boot sets install at the torsion bar rear anchor and adjuster positions. Both products install without significant dedicated labor time when completed as part of a torsion bar or front suspension service. For additional technical assistance, a dedicated support team is available to confirm correct product selection and fitment for the specific platform and torsion bar anchor configuration.
Plymouth GTX Torsion bar bushings are manufactured from polyurethane engineered to withstand the sustained torsional load, vibration and environmental exposure that torsion bar rear anchor positions are subject to throughout the vehicle's service life. The dust boot set is manufactured from quality elastomeric material designed to seal the adjuster bolt and anchor bracket interface against road spray, moisture and contamination under sustained driving conditions. Both products are backed by a limited lifetime warranty.
Plymouth GTX Torsion bar bushings are a practical solution for:
The right torsion bar bushing kit restores correct cushioning and isolation at the rear anchor position, and the dust boot set ensures the adjuster and bracket interface remain protected from the contamination that seizes torsion bar adjusters and complicates future service.
Explore the Plymouth GTX torsion bar bushing range and find the right kit for your vehicle. With a torsion bar rear bushing kit and a torsion bar dust boot set for applicable truck and SUV platforms with torsion bar front suspension, you can restore correct anchor bushing compliance and protect the adjuster mechanism from contamination and complete every torsion bar service with confidence.
Qty Required 1 |
|---|
Tell us what you were trying to find so we can improve the site.
Give FeedbackMicrosoft Internet explorer is at the end of its life and is no longer supported, this poses a security risk. As such the Fulcrum website does not support Internet Explorer.
If you are using Internet Explorer to browse this website, you may get unexpected errors when viewing pages or purchasing products through our checkout.
Please use Google Chrome, Mozilla Firefox or Microsoft Edge.
US
Australia
United Kingdom
Europe