Control Arm Bushes with Fitting Position Front Axle for FORD FALCON XA, XB

XA, XB FALCON Control arm bushes are the polyurethane pivot bush kits that replace worn rubber bushes at every front and rear control arm mounting position, restoring correct pivot compliance and geometry retention across the full suspension system. The control arm inner front, inner rear and outer pivot positions are the primary points through which wheel alignment geometry, handling balance, steering feel and NVH are all influenced. As factory rubber bushes wear and deteriorate, compliance increases at these positions, introducing geometry drift, steering imprecision, increased NVH and uneven tyre wear that progressively worsens with use.

Quality XA, XB FALCON polyurethane control arm bush kits restore correct compliance and geometry retention at each pivot position, reducing unwanted movement and delivering more precise, consistent and refined suspension performance across everyday and demanding driving conditions. With kits available for front and rear lower control arm inner front and inner rear positions, front and rear upper control arm positions, outer ball joint housing positions, toe arm positions, and combined front lower and upper arm kits, the range covers the full scope of control arm pivot renewal across a wide range of passenger, performance, 4WD, classic and applications. Most products are backed by a lifetime warranty.

Why Upgrade XA, XB FALCON Suspension?

Control arm bushes at the inner front, inner rear and outer positions are subject to continuous load cycling, heat and road contamination throughout the XA, XB FALCON's service life. Factory rubber bushes begin to degrade well before they reach the point of obvious failure, progressively softening and cracking in a way that introduces compliance drift and play before wear becomes visually apparent. By the time steering feel has become vague, tyre wear has become uneven or NVH has increased noticeably, the bushes have often been operating beyond their designed compliance range for a considerable period.

Replacing worn control arm bushes with quality polyurethane alternatives restores correct compliance at each pivot position simultaneously, delivering improvements in steering response, handling balance, geometry retention and NVH that reflect the full benefit of fresh, correctly specified pivot bushes. Polyurethane control arm bushes resist oil, heat and road contaminants more effectively than factory rubber alternatives, maintaining their compliance characteristics for longer and reducing the frequency of renewal across the XA, XB FALCON's service life.

XA, XB FALCON Control Arm Bush Range

The XA, XB FALCON control arm bush range includes:

• XA, XB FALCON Front Lower Control Arm Inner Front Bush Kits: Bush kits for the front inner pivot position of the front lower control arm, restoring correct longitudinal compliance and caster geometry retention at the front of the arm across a wide range of passenger, performance, 4WD and classic platforms.
• XA, XB FALCON Front Lower Control Arm Inner Rear Bush Kits: Bush kits for the rear inner pivot position of the front lower control arm, restoring correct compliance and caster geometry retention at the rear of the arm.
• XA, XB FALCON Front Lower Control Arm Outer Bush Kits: Bush kits for the outer pivot position of the front lower control arm, restoring correct compliance at the knuckle or ball joint housing interface on applicable passenger and classic platforms.
• XA, XB FALCON Front Lower Control Arm Combined Bush Kits: Combined kits covering both inner pivot positions of the front lower control arm in a single purchase on applicable 4WD and passenger platforms.
• XA, XB FALCON Front Upper Control Arm Bush Kits: Bush kits for the pivot positions of the front upper control arm, restoring correct compliance and geometry retention.
• XA, XB FALCON Rear Lower Control Arm Front Position Bush Kits: Bush kits for the front mounting position of the rear lower control arm, restoring correct compliance and rear axle geometry retention on applicable passenger, performance and SUV platforms.
• XA, XB FALCON Rear Lower Control Arm Rear Position Bush Kits: Bush kits for the rear mounting position of the rear lower control arm, restoring correct compliance and geometry retention on applicable passenger, performance and European platforms.
• XA, XB FALCON Rear Lower Control Arm Outer Bush Kits: Bush kits for the outer position of the rear lower control arm, restoring correct compliance at the knuckle interface on applicable passenger and performance platforms.
• XA, XB FALCON Rear Upper Control Arm Bush Kits: Bush kits for the pivot positions of the rear upper control arm, restoring correct compliance and rear wheel geometry retention.
• XA, XB FALCON Toe Arm and Trailing Arm Front Position Bush Kits: Bush kits for toe arm inner positions and trailing arm front pivot positions within the control arm family on applicable passenger, performance and SUV platforms.
• XA, XB FALCON Combined Front Control Arm Bush Kits: Combined kits covering both lower and upper front control arm positions in a single purchase on applicable 4WD and ute platforms.

Why Purchase XA, XB FALCON Control Arm Bushes?

Allowing worn control arm bushes to remain in service results in progressive geometry drift, handling imprecision, increased NVH and accelerating tyre wear across the positions affected. Using quality polyurethane replacement bush kits restores correct compliance and geometry retention at each pivot position, eliminating unwanted movement and returning the suspension system to a more precise, stable and refined standard from the moment of installation.

For workshops carrying out suspension servicing and alignment work, quality control arm bush kits provide correctly specified, XA, XB FALCON-matched solutions for every inner, outer, upper and lower control arm position, ensuring bush renewal is accurate and complete. For XA, XB FALCON owners and experienced DIY users, correctly specified control arm bush kits allow worn bushes to be renewed position by position or across multiple positions simultaneously, delivering measurable improvements in handling feel, geometry retention and NVH at each step.

Installation and Support

XA, XB FALCON Control arm bushes are designed for accurate installation at the relevant front or rear control arm inner, outer or upper pivot positions. Installation times range from approximately one and a half to four hours depending on the position, application and number of positions being renewed. Installation guides are available across most products to support both professional workshops and experienced DIY users. For additional technical assistance, a dedicated support team is available to help ensure correct product selection and fitment for the specific vehicle and position.

Repair and Upgrade

XA, XB FALCON Control arm bushes are manufactured from high-strength polyurethane engineered to withstand the load, vibration and environmental exposure that suspension control arm pivot components are subject to in everyday and demanding use. Resistant to oil, heat and road contaminants, polyurethane control arm bushes maintain their compliance characteristics for longer than factory rubber alternatives and deliver more consistent geometry retention and handling performance throughout the vehicle's service life. Most products are backed by a lifetime warranty.

Who XA, XB FALCON Control Arm Bushes Are For

XA, XB FALCON Control arm bushes are a practical solution for:

• Professional workshops carrying out suspension servicing, alignment preparation and bush renewal across front and rear control arm positions on a broad range of vehicle makes and models.
• Experienced DIY users replacing worn front or rear control arm bushes at inner, outer or upper positions to restore correct compliance, improve geometry retention and reduce NVH across any number of positions.
• Classic and performance vehicle owners overhauling front and rear suspension systems requiring correct polyurethane bush renewal at all control arm pivot positions for consistent compliance across the system.
• 4WD owners and enthusiasts carrying out suspension maintenance or lift-related bush renewal on front upper and lower control arm positions to maintain correct geometry and handling performance.
• Anyone experiencing vague steering, increased NVH, uneven tyre wear or handling imprecision attributable to worn or deteriorated control arm pivot bushes at any front or rear position.

The right control arm bush kit restores correct pivot compliance and geometry retention at every position renewed, eliminating unwanted movement and delivering more precise, stable and refined suspension performance every time.

Shop XA, XB FALCON Control Arm Bushes

Explore the full XA, XB FALCON control arm bushes range and find the right kit for your vehicle. With front lower inner front and inner rear bush kits, front lower outer bush kits, front upper bush kits in standard and offset variants, rear lower and rear upper bush kits, combined front control arm kits and toe arm bush kits across a broad range of passenger, performance, 4WD, classic and commercial vehicle applications, you can renew every control arm pivot position accurately and complete every suspension service with confidence.